⎝⎛炸金花⎞⎠

Welcome to the official website of Ningbo Zhongxiao Welding Equipment Co., Ltd. !
Product selection: spot (convex) welder series butt welder series row welder seam (roller) welder wire product special machine series other welding special series welding samples and equipment accessories
You are here: ⎝⎛炸金花⎞⎠ -Products
DTN Pneumatic Spot Welder

Performance characteristics:

1. Adopt high-precision guide mechanism, the piston rod is pressurized, and the followability is good. The solenoid valve is directly connected to the cylinder to speed up the reaction speed and reduce the loss of air flow.

2. Long service life and low noise. Equipped with a pressurizing speed adjustment function. The descending speed of the pressurizing head can be adjusted arbitrarily to alleviate the impact when pressing the welding object. Mechanical impact improves cylinder life and reduces noise.

1. Safe and easy-to-use high-performance gas path system. The filter cup is equipped with a shield, which can splash debris when the cup is broken, and can also protect the impact of external favorite collisions. The cup and shield can be mounted and disassembled for easy maintenance.

2. It adopts the cyclic forced cooling method, which is convenient to remove water blockage, improve the cooling performance of the equipment, avoid waste of water, and greatly reduce the amount of cooling water.

3. It adopts high-strength body structure, good rigidity, strong impact resistance and vibration resistance, which can prevent the electrode tip from sliding during welding pressure and achieve stable welding.

4. The simple and practical secondary conductor upper insulation method can avoid the adhesion of iron filings or short circuit accidents in the insulation parts that are easily generated when the lower seat is installed with welding tools.

5, using a microcomputer control system, with constant voltage / constant current two control methods, and with a secondary transformer, three-stage discharge function, can accurately control welding time and welding current, easy adjustment.

6. Water-permeable all-copper transformer, high-permeability silicon steel sheet, secondary overall structure, large output current, energy saving and environmental protection, and long service life.

7, using high-power SCR non-contact switch water-cooled high-power thyristor elements, the output current is strong, stable and reliable.

8. The solenoid valve adopts the British "Nuoguan" special solenoid valve, which has fast response speed and low failure rate.

9. In the secondary circuit with high conductivity and low power loss, the secondary output on the main transformer adopts multi-layer high-toughness and high-conductivity copper flexible tape, and it is V-shaped connection, which greatly improves the service life and lower secondary output. The integrated connection mechanism reduces power loss.

10. The convex soldering station is convenient for users to install electrode fixtures, and perform multi-directional and multi-welding welding, convenient adjustment and simple operation.

11. The spot welding head and electrode are made of high-strength chromium-zirconium-copper material, which has the characteristics of high wear resistance and high temperature resistance, which can reduce the cost of electrode materials for users.

use:

It is widely used in various wires and boards. Tubes, shaped copper. High quality welding of aluminum, iron, stainless steel and other metals.

Technical Parameters:

model DTN-50 DTN-80 DTN-100 DTN-150 DTN-200
rated power 50KVA 80KVA 100KVA 150KVA 200KVA
Input voltage 380V 380V 380V 380V 380V
Load factor 20% 20% 20% 20% 20%
Short circuit current 22KA 26KVA 29KA 36KA 42KA
Electrode arm extension 400mm 400mm 400mm 400mm 400mm
Cylinder stroke 60mm 60mm 60mm 100mm 100mm
Cylinder diameter ¢ 100mm ¢ 125mm ¢ 125mm ¢ 160mm ¢ 200mm
Electrode arm ¢ 60 * 200mm ¢ 60 * 200mm ¢ 60 * 200mm ¢ 80 * 240mm ¢ 80 * 240mm
Electrode grip ¢ 25 * 180mm ¢ 25 * 180mm ¢ 25 * 180mm ¢ 32 * 200mm ¢ 32 * 200mm
Projection welding table size 120 * 130mm 120 * 130mm 120 * 130mm 150 * 160mm 150 * 160mm
Electrode tip ¢ 16mm ¢ 16mm ¢ 16mm ¢ 20mm ¢ 20mm
Welding thickness 3.5 + 3.5mm 4.0 + 4.0mm 4.5 + 4.5mm 5.0 + 5.0mm 5.5 + 5.5mm
Cooling water flow 6 L / min 6 L / min 6 L / min 6 L / min 6 L / min
weight 360Kg 420 Kg 460 Kg 680 Kg 720 Kg
Suggested input cross section area 16 mm2 16 mm2 25 mm2 35 mm2 50 mm2

Scan and visit the mobile website
online service
七乐彩 七乐彩 im体育娱乐 真人游戏平台注册